| Polished slab | Approximately 18–20 mm thick; standard slab sizes | US$20–38/m² | A common interior and general-purpose option. Slab size, colour consistency, finish quality, and usable yield affect the final rate. |
| Polished slab | Approximately 28–30 mm thick; standard slab sizes | US$30–55/m² | Uses more stone and weighs more than a 20 mm slab. Thickness tolerance and block yield can also affect cost. |
| Calibrated tile | Common formats such as 300 × 600 mm or 600 × 600 mm; around 18–20 mm thick | US$24–45/m² | Tile cutting, calibration, edge quality, sorting, and the proportion of non-standard pieces influence the price. |
| Cut-to-size pieces | Project-specific dimensions; polished or honed finish | US$35–75/m² | More measuring, cutting, edge finishing, inspection, and protective packing are typically required. Complex shapes may cost more. |
| Custom profiles or fabricated components | Countertops, stair treads, risers, or pieces with shaped edges | US$50–100+/m² equivalent | Pricing depends on the piece dimensions, edge profile, cut-outs, finishing details, and fabrication labour; some suppliers price these items by piece or linear metre instead. |
| Main Factors That Determine Sesame Grey Granite Prices |
| Stone selection and colour consistency | Standard commercial selection versus tighter colour and pattern matching | More selective grading generally costs more | Natural variation in grain, shade, and mineral distribution means that carefully matched lots can require additional sorting and reduce usable yield. |
| Thickness and dimensional tolerance | Thicker material or stricter thickness and flatness tolerances | Usually increases material or processing cost | Thicker slabs consume more stone; tighter tolerances require more precise cutting, calibration, and quality checks. |
| Surface finish | Polished, honed, flamed, or other specified finish | Varies by finish and processing requirements | Different finishes require different equipment and processing steps. A requested finish should be confirmed on a sample because appearance can vary by stone lot. |
| Order quantity and cutting plan | Small trial order versus a larger order using standard sizes | Small or highly customized orders may have a higher unit price | Setup, sorting, and packing costs are spread across fewer square metres in small orders. Efficient nesting of cut pieces can improve material yield. |
| Packaging and delivery terms | Crates, export packing, inland transport, port handling, and freight | Additional costs beyond the ex-works ranges above | Shipment volume, weight, destination, route, and agreed delivery terms affect the landed cost. Request these as separate quotation lines for comparison. |